without locking ring with l ocking ring panel mounting title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200msp6t3b5m1reh 9/23/2013 ST216001 a ebp 1 1 7.87 [.310 in] 8.64 [.340 in] 2.79 [.110 in] 8.13 [.320 in] 5.08 [.200 in] 25 ~ pos. 1 pos. 3 5.08 [.200 in] .51 [.020 in] pos. 1 pos. 2 pos. 3 switch function none off on open n/a 3-1 a 21243 released for production 9/23/13 ebp note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: gold 5. rating: 0.4va max at 20v max (ac or dc) 6. electric life: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be supplied bulk: t100011-lock washer qty-1 t100002-lock ring qty-1 t100000-hex nut qty-2 1/4-40 uns-2a threads e-logo on opposite side circuit: spst no epoxy on terminals below this surface 1 3 5.72 [.225 in] flat 3 1 5.08 [.200 in] .51 [.020 in] 1.52 [.060 in] .76 [.030 in] 1.53 [.060 in] 2.54 [.100 in] n 7.10 [.280 in] n 6.35 [.250 in] n 6.35 [.250 in] n 2.38 [.094 in] 6.10 [.240 in] 5.95 [.234 in]
|